We’ll configure SW1 as a DHCP server, so the access points receive a dynamic IP address. SW1 and the WLC will have a static IP address in VLAN 10: For example, you could create one wireless network for corporate users and another one for guest users. Each SSID can map to a different VLAN so, with two VLANs, we can create two separate wireless networks. We want to separate our management traffic from our wireless client traffic, which is why we have a separate management VLAN. VLAN 20 and 30 are for wireless networks.The WLC uses the management interface to communicate with the access points, and we can use the management interface to configure the WLC through SSH or the GUI. This network will have three VLANs: 10, 20, and 30: ![]() ![]() I’ll explain how to configure the WLC and the switch, and we’ll take a quick look at the WLC’s GUI. I use a Cisco WLC 25 access points but any other WLC and access points will work. In this lesson, we’ll create a basic network with the Cisco Wireless LAN Controller (WLC) and two access points.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |